OL5800 User Manual
8
5 Installation and Charging of the Battery Pack
1.
Open the battery compartment by sliding the cover down.
2.
Plug the Battery Pack connector into the Handset battery socket. Place the battery pack and wires in the
compartment.
3.
Close the battery compartment.
4.
You may change the face panel with one of the color options provided.
5.
Choose the appropriate mounting bracket. The smaller bracket is for desk or countertop installations. The larger bracket
is for wall mounting. You must use one of these brackets. If you are using the wall mounting bracket, thread the
telephone cord and DC power cord through the large opening in the bracket. Plug the two cords into the corresponding
jacks on the bottom of the Base.
6.
Snap the bracket into place on the back of the Base. If you are using the desk top bracket, run the two cords through
the channel at the back of the bracket. If you are wall mounting the Base, carefully line up the slots on the wall mount
bracket with the studs on the telephone wall plate, and carefully mount the telephone on the wall.
7.
Connect the telephone line cord to the telephone jack, and the power supply to a live power outlet. Make sure you
are not using an outlet controlled by a switch.
