OL3022 User Manual
9
63. Press
RIGHT
to move to the next location.
64. The hour field is blinking. Use
UP
or
DOWN
to select the current hour (
be careful of am/pm
).
65. Press
RIGHT
to move to the next location.
66. The minute field is blinking. Use
UP
or
DOWN
to select the current minute.
67. Press
SELECT
to confirm your programming.
Note:
The order of Day and Month will depend on how you set the Date Format.
Time is also set upon receiving Caller ID information (
however, you must set the year manually
).
9 Daylight Saving Time
The Info Globe features a hundred-year calendar with an automatic Daylight Saving Time (DST) adjustment.
Daylight Saving Time begins at 2am on the first Sunday of April. Time reverts to standard time at 2am on the last Sunday
of October.
That is, on the first Sunday of April, the clock increments from 1:59am to 3am. On the last Sunday of October, the clock
falls back from 1:59am to 1am. This is done automatically when the feature is enabled. If the feature is off, the clock
increments normally from 1:59am to 2am.
68. Press
SELECT
to access the menu.
69. Use
UP
or
DOWN
to select
SET DST
in the menu, then press
SELECT
again.
70. You will see:
DST: OFF
(or
ON
) The ON/OFF field is blinking.
71. Press
UP
or
DOWN
to toggle between ON and OFF.
72. Press
SELECT
to confirm your selection.
Note:
The default value after a power failure is DST: Off.
10 Personal Messages
Programming Personal Messages
You can program up to
6
personal messages:
73. Press
SELECT
to enter the menu.
74. Use
UP
or
DOWN
to select
SET MESSAGE
in Menu.
75. Press
SELECT
again.
76. The
MSG1
envelope icon is blinking.
77. Use
UP
or
DOWN
to choose the desired location (1 – 6).
78. Press
SELECT
on the chosen location.
Set Message Frequency
You are now asked to select message frequency. Use
UP
or
DOWN
to choose either:
DAILY
Your message is repeated every few minutes, along with the other categories of information, such as time,
date and Caller ID.
DATE
Your message is displayed only the specified date. Perfect for birthdays or anniversaries.
Use
UP
or
DOWN
to toggle between
Daily
and to program a specific Date.
79. To select Daily, press
SELECT
when
Daily
flashes. To program a
date
, press
SELECT
when the
month
flashes.
80. To set the message date, use
LEFT
and
RIGHT
to toggle between Month and Date.
81. The chosen field will blink; use
UP
and
DOWN
to program the desired Month and Date.
82. Press
SELECT
to confirm message frequency; you are now ready to enter your message.
