15
Giu
Validation Tests
Selecting the Features to be Tested
Before inserting the bank notes, select the sensors
which should be active to test the respective feature
(UV, MG, MT, IR).
Æ
Press the
CF
button [13].
Ê
The bank note counter switches to the selection
mode for features to be tested, as described below.
When this mode is active, the digit keys cannot be
used to enter numbers.
Press the
CF
button [13] again to end the selec
tion of features for testing and switch back to
digit entry.
Detecting UV Features on Bank Notes:
Æ
Press the
UV
button [15].
Ê
The ultraviolet sensor for detecting UV features is
activated/deactivated.
UV
[36] appears in the display.
Detecting the Magnetic Features on the Bank
Notes:
Æ
Press the
MG
button [14].
Ê
The magnet sensor used to detect the magnetic
features is activated/deactivated.
MG
[35] appears in
the display.
Detecting the Advanced Magnetic Features on the
Bank Notes:
Æ
Press the
MT
button [23].
Ê
The magnet sensor used to detect the advanced
magnetic features is activated/deactivated.
MT
[32]
appears in the display.
Detecting the Bank Note Width:
Æ
Press the
DD
button [20].
Ê
The sensor for detecting the width of the bank
notes is activated/deactivated.
DD
[33] appears in the
display.
Detecting Double Bank Notes
The infrared sensor should always be active
when testing bank notes.
Æ
Press the
IR
button [16].
Ê
The infrared sensor for detecting double bank
notes is activated/deactivated.
IR
[34] appears in the
display.
Preparing Bank Notes
The best results are achieved after a warm-up
phase of 3 minutes.
Bright ambient light can affect the sensor and falsify
results.
Pay attention to the following points to prevent mal
functions.
C
D
A
B
Æ
Check the batch of bank notes for paper clippings,
paper clips, rubber bands and other foreign bodies
and remove them before inserting the bundle in the
machine (Figure A).
Æ
Do not insert any damaged bank notes (Figure B).
Æ
Smoothen any creased and folded bank notes
before inserting them (Figure C/D).
Æ
Do not insert any bank notes which are stuck to
gether in the bank note counter.
Æ
Fan out the bank notes to separate them prior to
insertion.
