background image

Users Guide for NC-350A Currency Counter 

10 

Press the SPEED key to change the default SPEED setting, if required. There are three selectable 
speed: 600pcs/min(Low), 1000pcs/min(Standard) and 1500pcs/min(High). After selecting the desired 
speed, press the START key to save the setting and exit from the setting mode. 

 

7. COUNTING MODE SETTING 

Auto/Manual Start Mode 

 

By pressing the START key for five seconds, the machine will enter into the START system feature. 
The display will show: 

 

 

 

Press the two numeric keys “0” & “1” to select the Auto/Manual Start Mode. Select “1” to enter into the 
Auto Start Mode. Select “0” to enter into the Manual Start Mode. After selecting the desired level, 
press the START key to save the setting and exit from the setting mode.  

 
 

CONTINUOUS COUNTING MODE 

 

When the 3 digits of small LED Display shows ‘  - - - ‘, the machine is in the Continuous Counting 
Mode. If you place some notes in the Hopper, the machine will count the notes until the Hopper is 
either empty, or stops whenever an Error occurs during the process. 
 

BATCH COUNTING MODE 

 
Input your desired batch number by using the ten numeric keys. 
For example, if you want to set the batch number to 20, just first press the numeric key 2, and then 
press the numeric key 0. The display will show: 
 

 

 

 
 
 

 

Summary of Contents for NC-350A Series

















Reviews: