![background image](http://html1.mh-extra.com/html/olympia/ic-1280z/ic-1280z_operating-manual_3876518012.webp)
Connecting the Camera
Inserting the MicroSD, Positioning or Mounting the Camera
G
12
Connecting the Camera
This section provides information on how to position and
connect the camera and insert a microSD memory card in
it.
Inserting a microSD memory card
Positioning the camera or mounting it on a wall
Connecting the camera - network cable
Connecting the camera - power adapter and receiver
Inserting the MicroSD Memory Card
In order to be able to make video recordings and save
them, you must insert a microSD memory card in the
camera. Use a microSD memory card with a maximum
memory capacity of 32 GB.
No microSD memory card is enclosed in the camera
package supplied.
1. Insert a microSD memory card in the microSD memory
card slot at the rear of the camera.
The microSD memory card latches audibly in place.
Positioning the Camera
When the camera is put into operation for the first time, it
must be connected to a network connection port (LAN) on
your router via the network cable. Therefore, when putting
the camera into operation for the first time, it should be
located near your router.
After putting the camera into operation for the first time
and configuring it, you can install the camera at the lo
cation where it should perform the video surveillance.
When doing so, it is essential to observe the applicable
laws and local regulations.
Mounting the Camera on the
Wall/Ceiling
You can mount the camera anywhere using the mounting
bracket contained in the package supplied.
WARNING!
Risk of fatal injury through electric shock or gas ex
plosion!
During installation, pay attention to the possibility of
electrical cables and gas pipes running in the walls.
Pay attention that you do not damage electric cables
or gas pipes.