17
Attention:
Failure to observe the safety labels can result in severe personal injury! If
an item (sleeve, tie, etc.) should accidentally enter one of the infeeds, dis-
connect the power plug from the power socket or press the blue illumi-
nated
ECS
button!
Safety note:
The power socket must be in the immediate vicinity of the
unit and easily accessible. This enables you to disconnect
the device from the power supply quickly in an emergency.
1.2 Electrical
safety
guidelines
Attention:
Ensure that the voltage specification of the device coincides with that of
your power outlet, refer to Chapter "Technical Data"!
●
Disconnect the power plug from the power socket:
●
before emptying the waste bin,
●
if it will remain unused for a longer period,
●
before cleaning the device,
●
before moving the device.
●
Do not put the device into operation in the case of damage to the power cable, the
power plug or the device itself (risk of injury)!
●
Do not complete any modifications to the power cable because it is designed for the
power supply specified.
●
Only use an approved extension cable. Do not use any multiple sockets, adapters or
unapproved extension cables.
●
Never exceed the recommended load capacity of the power socket or any connected
extension cables!
Attention:
It is forbidden to open the cutting mechanism attachment for repair pur-
poses. Risk of fatal injury! In addition, all claims under the terms of guaran-
tee will be deemed null and void.
2 Intended
Use
●
Only use the
ECS 510.3 CCD
shredder to shred paper, CDs, DVDs and credit cards
by inserting them in the respective slot! The material to be shredded must be dry and
comply with the requirements stipulated in Chapter "Technical Data"! Attempting to
shred other material can lead to personal injury (e.g. through splinters from hard
material, etc.) and damage to the equipment (e.g. damage to the cutting mechanism
etc.).
●
Remove all paper clips before feeding paper in the device!
●
Do not shred continuous forms, labels or envelopes in this device! Doing so could
damage the cutting mechanism and, as a result, all claims under the terms of
guarantee will be deemed null and void.
●
The unit may only be used in dry, indoor rooms.
●
The device is not intended for commercial use. Observe the operating cycle
stipulated in Chapter "Technical Data".
