Cash Register CM 75 / 760 / 761 / 762
Olympia 2010
Page 22
Specifications subject to change without notice!
6 Clerk
System
The default setting for the clerk system is deactivated (refer to System Option 8).
6.1
Activating the clerk system
Input
Display
Confirm by pressing
●
Set the key to PRG
●
Press
8
and
1
.
●
Confirm by pressing
RA
.
!
0,81
!
When the clerk system is activated, a dot appears in the display:
.
0.
0
0
Clerk system active
6.2
Clerk system without a password
Condition: The clerk system is activated.
If no password has been programmed for a clerk, that clerk logs on at the cash register with his clerk number.
6.2.1
Clerk log-on with clerk number
Note:
A maximum of 8 clerks can be registered in the system.
Example: Clerk no. 6 logs on.
Input
Display
Confirm by pressing
●
Set the key to REG
●
Enter the 1-digit clerk number
●
Confirm by pressing
CLERK
!
0,06
!
6.2.2
Clerk logs off
Example: A salesperson logs off.
●
Set the key to OFF
Note:
System option 9 can be configured so that a clerk must log on again after each registration which is
completed.
6.3
Clerk system with password
It is possible to protect clerk log on codes by means of a password.
In this case, clerks log on by entering their respective clerk number and an additional password. The password is a 3-digit
code (000 to 999). The clerk number and password thus comprise the 4-digit clerk code.
