Change BDA - GB
LED (Light Emitting Diode) are characterised by small current consumption and a very long
durability (approx. 10,000 operation hours) and usually do not have to be changed therefore.
The lamps consist of 9 series LED strips which are glued to the aluminum frame.
Replacement of individual light bands is possible.
Lighting unit, transformer and switch are available as a spare part at OLYMP.
4. Replacement of LED strips:
> Unplug mains cable of lighting at the socket.
Unless the socket is located in the base area of the reception:
remove facility parts of center compartment, remove door (if ordered), remove bottom
shelf (B)
> Remove digital print from lighting unit, see point 2.
> Cut the connection cable of the defective LED strip and loosen strip from back panel.
> Loosen protective foil from new LED strip and glue on strip to back panel.
> Connect new LED strip to connection cables by means of clamps.
> Plug mains cable into socket.
> fix digital print to lighting unit, see point 2.
5.
Environmental protection
For the disposal of the product public regulations can contain special regulations regarding the
disposal. Please consider these regulations.
6.
Technical Data:
Power supply:
220-240 V / 50-60 Hz
power input:
60 W
Safety class:
2
EC-Declaration
In the sense of the EEC guideline electrical operational funds for
of Conformity:
use within certain voltage limits 93/97/EEC (low-voltage guideline);
acc. to Article 10 Paragraph 2 of the Directive 89/336/EEC
(EMC-Directive)
Shining means:
9 rows of LED strips with white LED
light emitting diodes class I
EN 60825-1:1994+A11:1996+A2:2001
(Purchase of the LED strips exclusive from OLYMP)
Plug:
plug GB
GB
