81.
To complete trimming of your shed,
attach both the
Horizontal Door Trim
(32”)
and
Horizontal Narrow Wall Trim
(8 3/4”)
with 4 and 2 - 1 1/2” finishing nails.
82.
Attach
Horizontal Gable Trim
(1/2” x 4 1/2” x 85 1/2”) to both front and rear
of shed. Position equally over gable and
wall seam to cover Gable Flashing. Use
8 - 1 1/2” finishing nails per piece to secure.
Angle cut
on end
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 32
Caulk
gap.
Window
frame.
Screw insert into
thick part of
siding.
80a.
To reduce possible water from penetrating into the win-
dow cavity, caulk gap on both sides of window opening prior to
installing
Window Insert.
Position insert in cavity and screw with
8 - 1 1/4” Screws
.
80b.
Once Insert is attached,
caulk the “channel gap” between
the Insert’s outside flange and the
siding. Also put a bead of caulking
horizontally at top of window
where the flange and siding meet.
This additional caulking will also
will reduce the chances of mois-
ture entering into your shed.
80c.
Position
Window Trim
around window doing a dry run first and attach with
4 - 1 1/2”
Finishing Nails
per piece. Window trim has a small dado on reverse face. Outside flange of window
will roughly sit in the dado to give a better fit.
Caulk
gap.
Trim dado
sits in flange.
