51.
Locate 2
Roof Battens Outside
and 1
Roof Batten Inside
and
place on roof Rafters. Place at top of Rafter section where Rafters and
Ridge boards meet. Battens should be positioned with each end
touching a doubled Rafter. Battens will overhang outside Rafters by 3
3/4”.
Parts (Step 51 - 57)
Roof Battens Outside
(3/4” x 3 1/2” x 49 1/4”)
x 16
Roof Battens Inside
(3/4” x 3 1/2” x 45 1/2”)
x 8
Batten Spacer
(3/4” x 1 1/2” x 14 1/8”)
x 12
Hardware (Steps 51 - 57)
S2
- 1 1/4” Screws
92 x total
3 3/4”
Flush to Ridge Board
52.
Attach each
Batten
to Rafters with
3 - 1 1/4” screws
per Rafter section.
Important:
pre-
drill pilot holes with 1/8” drill bit first to prevent splitting.
53.
Place
Batten Spacer
flush with first set of Battens on outside Rafter. Batten Spacer allows
you to line up next row of Battens. Attach each with
Batten Spacer
with
2 - 1 1/4” screws
.
Roof Battens Outside
Roof Battens Outside
Roof Batten
Inside
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 31