manualshive.com logo in svg

OLT 8x4 SpaceSaver Garden Shed, Assembly Manual

Share
Download
OLT 8x4 SpaceSaver Garden Shed Assembly Manual Download Page 22

52.

Attach 

Corner Filler Trims 

where gaps exist in front corners (2 per side). Hammer with 8 - 1 1/2”

finishing nails. Position bottom filler just below wall siding. Top filler just below soffit. Gap in middle.

53.

Position and attach Corner Filler Trims in the rear as per 

Step 52. 

There is an additional 10” long

Rear Center Corner Filler Trim

that you will need to center and attach as well using 2 - 1 1/2” nails.

54.

Locate 

Vertical Door Trim

(2 - 1/2” x 3 1/2” x 79”).  Position Door Trim flush with outside of

narrow wall stud.  Trim should be aligned tight underneath Soffit. Attach with 8 - 1 1/2” finishing
nails.  

Flush with
Narrow Wall
stud.

Vertical
Door Trim.

Toll Free 1-888-658-1658             www.outdoorlivingtoday.com           [email protected]

Page 22

Gap to be
covered.

Wall Siding

Tight under-
neath soffit.

Soffit

Rear Center Corner
Filler Trim

Summary of Contents for 8x4 SpaceSaver Garden Shed































Reviews:

No comments

Brands by name

Popular brands

Load more brands