![background image](http://html.mh-extra.com/html/olt/6x6-maximizer/6x6-maximizer_assembly-manual_732308010.webp)
11.
With Plywood positioned
correctly on floor framing, attach
using
16 - 1 1/4” screws (Part C)
per sheet.
2. Wall Section
Exploded view of all parts necessary to complete
the Wall Section. Identify all parts prior to starting.
Wall Panels - 6 pcs.
(Part 2A)
Side Top Plates
- 2 pcs. (Part 2E)
Angle cut on ends
Front and Rear Top
Plates - 2 pcs. (Part 2F)
Angle cut on edge
Gable Walls - 2 pcs. (Part 2H)
Door Jamb - 2 pcs.
(Part 2C)
Bottom Wall Plate - 6 pcs.
(Part 2B)
Bottom Wall Plate
12.
Carefully lay a
Wall Panel (Part 2A)
face down. Locate a
Wall Plate - 1 1/2” x 2 1/2” x 35”
(Part 2B)
and position plate flush with framing and siding. Attach to bottom of wall framing with
3 - 2 1/2” screws (Part B).
Complete all bottom wall plate attachments for remaining walls at this time.
Door Header
(Part 2D)
plywood
pushed together
at seam
75”
70” Front
Completed Floor
Door goes on 70” side
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 10