2.
When correctly positioned, attach each Joist with
4 - 2 1/2”
screws (2 per end).
Complete all Floor Frame and Joist connections.
You can find the Square Drive Bit for the screws
in with the Hardware Kit Bag.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 6
You can find the
Square Drive Bit
for the screws in
with the Hardware
Kit Bag.
4.
Locate
Floor Runners
and
Wide Floor
Runners
. Lay out
Floor Runners
above
Completed Floor Frame
section as shown
above. The
3 1/2” wide Floor Runner
should be
flush with the edge of the floor frame.
5 1/2” wide
Floor Runner
should overhang the edge of the
floor Frame by 2 3/4”. Third set of Floor Runners
should be centered on Floor Frame.
Parts (Steps 4 - 9)
Wide Floor Runners
(1 1/2” x 5 1/2” x 56”)
x 2
Wide Floor Runner
(1 1/2” x 5 1/2” x 70”)
x 1
Floor Runners
(1 1/2” x 3 1/2” x 38”)
x 4
Floor Runner
(1 1/2” x 3 1/2” x 72”)
x 8
Hardware (Steps 4 - 9)
S1
- 2 1/2” Screws
x 116
total
3.
Lay out
75” Floor Frames
as shown above. Attach each completed frame to the next with
8 - 2
1/2” screws
(24 Total). Once complete assemble 66 1/2” Floor Frames the same way.
Flush
Overhanging
5 1/2”
2 3/4”
