Pedal chain order 1
When used after another pedal, the Spell will increase the volume proportionally
with the boost and/or mid control. In this scenario you can also use The Spell to
change the tone produced by the pedal in front of it. Use the Hi Cut to make this
pedal less harsh and the Mid control to adjust its mid range response.
Pedal chain order 2
When used in front of an overdrive/distortion/fuzz or amp The Spell will push it
to produce more distortion when increasing the boost level. Every amp or dirt
pedal reacts different when pushed (some even don’t like it all). If the sound
gets muddy with more boost, add some mid, and if it gets harsh use the Hi Cut
switch to tame it. The volume increase will depend on how much the other pedal
compresses the signal. Our The Wizard Overdrive can be pushed really hard and
works excellent for this purpose.
Pedal chain order 3
With The Spell last on your pedal board you can use it as a buffer with the
possibility to adjust the important mid range depending on the amp you have at
a specific time.
This is very useful when playing with different back lines from time to time. If
you got a mid scooped amp, just increase the mid and your pedals will work as
intended, or vice versa.
Pedal chain order 4
With The Spell in the beginning on your pedal board you can use it to compen-
sate for different kind of pickups. Use the Mid control to set the tone, and the
boost to compensate for level loss. You will be amazed of what you can do with
your tone when used in this way.
Summary of Contents for The Spell Booster
Page 1: ...USER S MANUAL 1 0 Olsson ...
