Olsson BJF100, Owner'S Manual

Page: 6 / 12

17
11 12 13 14 15 16 10
FUNCTIONS - FRONT PANEL
1. INPUT
Input jack for your guitar. Use a good quality
screened guitar cable.
2. GAIN
This adds gain/distortion to your sound. At
higher settings the compression and the
amount of overtones will increase.
3. VOLUME
This is the volume for the overdrive channel.
4. BASS
This controls the amount of bass or bottom
end.
5. MIDDLE
This controls the midrange. At lower settings
you will have a scooped sound and at higher
settings the guitar will be more easily heard
in the mix.
6. TREBLE
This controls the higher frequencies.
7. CHANNEL SWITCH
Switches between 1-Overdive and 2-Clean/
Crunch channel when foot-switch is not
connected. When using the foot-switch this
should be set to 2.
8. GAIN
This adds gain/distortion to your sound. At
higher settings the compression and the
amount of overtones will increase.
9. VOLUME
This is the volume for the clean/crunch
channel. If you like to make it a bit easier to
adjust the volume at very low levels, activate
the FX-Loop, without anything connected,
and decrease the send and return volumes
to desired levels.
10. CLEAN/CRUNCH
Switches between clean and crunch sounds.
The sound level increases a bit when setting
to Crunch.
11. BASS
This controls the amount of bass or bottom
end.
12. MIDDLE
This controls the midrange. At lower settings
you will have a scooped sound and at higher
settings the guitar will be more easily heard
in the mix.
13. TREBLE
This controls the higher frequencies.