25
4.6 Units
The units can be changed from Metric to English or vice versa during data collection.
Select the “Unit” option found on the Main Menu, as shown in Figure 11 below, to
change the units.
Figure 11 – Units
4.7 Volume
The volume (or gain) can be changed during data collection by adjusting the green
“Volume” option arrows upward or downward or by typing a new value in the “Volume”
field found on the Toolbar, as shown in Figure 12 Below.
Figure 12 – Volume
4.8 Save Parameters
The parameters (such as “Expected Concrete Thickness” and “Velocity”) can be saved
by selecting the “Save Parameters” option found in the Main Menu as shown in Figure
13 below. Upon exiting the program, you will get another opportunity to save
parameters. Be careful when you save parameters; they will be saved by the program
for future use the next time you open the software. If you have calibrated for velocity,
this velocity may not be valid for your next job.
Figure 13 – Save Parameters
Units
Volume
