Olorin MC190D User Manual Download Page 6

6

Intended use of this product

This product has been designed and developed for use as a visual output device for direct 

connection to a Personal Computer and PC compatible devices as well as other video generating 

equipment, such as cameras. The product will accept industry standard video signals coming over 

cables with industry standard type connectors. The product will operate and function properly in 

normal office environment and under conditions as specified in the Product Specification chapter.

Attempting to use the product for any other purpose than its intended use or 

connecting to other devices could cause damage to the product and / or to other 

property and equipment. There could also be a risk of bodily harm to yourself or other 

persons. 

 

The product operates on 12V (some on 24V) DC power and must be connected thru the AC 100-

240V, 50-60Hz to12V DC adapter (or 24V DC adapter) which is included with the product. Power 

to the adapter should be coming from an ordinary grounded AC 100-240V power outlet.

Never try to connect the product to any other power source than the 12V/24V adapter 

delivered together with the product. There would be a risk of electrical shock which 

could cause bodily harm, possibly even death. Most certainly such electrical shock will 

damage the product.

The product can also be delivered with certain options installed. Such options could be touch 

panel or other special accessories.

All other uses of the product, including but not limited to attempts such as;

• connection to other types of power sources 

• using other types of mounting or placement of the product 

• connection to other devices than those for which the monitor has been         

  designed.

will void any and all warranties of the product and the manufacturer will not be 

responsible or libel for any bodily injury or property damage either directly or 

indirectly caused by such non-intended use of the product.

Warning

Warning

Intended Markets

Olorin products are developed primarily for sales and installation in countries within Europe and 

North America. The products comply with all regulations and directives issued by the European 

Union and by authorities in the United States.

The products are not intended for sales and/or installation in countries, which require 

other or additional mandatory approvals than those required by the authorities of the 

European Union or the United States.

Consult the product identification label or product specification for regulatory approvals that apply 

to this product.

Warning

Warning

Summary of Contents for MC190D




































Reviews: