3.07
The appliance must be installed so that switches or other controls are accessible.
Check that the electrical system is up to standard. Consult an installer.
3.08
The appliance is operated and operated exclusively with the supplied remote control
3.09 After mounting, make sure that the electrical outlet is easy to access and is equipped with a single-pole
interruption device with a separation distance between the contacts of at least 3mm.
3.14
The supplied power cable is fitted with a SCHUKO plug. Die-cast.
Do not use for any reason other connections than the plug-cable supplied.
Do not use the appliance if the cable is damaged.
9
Define the fixing point of the bracket
Define the position of the holes
Apply the holes to the wall for inserting screw anchors
Attach the bracket
supplied with the
screws supplied
Once installed by the above instructions, proceed with
testing and ignition using the remote control supplied.
Make sure that the batteries have been inserted. It
must not appear in the remote control display
no signal battery charge check
