STOP... og læs dette. Det er virkelig vigtigt!
• Venligst læs samlemanualen omhyggeligt, således babysengen bliver samlet korrekt. Venligst tjek løbende om skruer og løsdele
sidder fast
• Undgå faldeulykker ved at følge barnets udvikling tæt og flytte positionen af madrashøjden herefter
• Sæt aldrig babysengen nærheden af åben ild eller andre varme kilder, der kan forsage brandfare
• Sørg for babysengen er placeret på et stabilt underlag
• Efterlad ikke småting, snore, ledninger osv. indenfor barnets rækkevide, således alle farer for kvælning elimineres
• Altid brug en madras der passer til babsengen i størrelsen 1200 mm x 600 mm, således alle sprækker bliver elimineret, så
barnet ikke kommer i klemme
• Aldrig brug mere end en madras i babysengen
• Sørg for afstanden mellem madras og topkanten på babysengen er minimum 200 mm
• Anvend aldrig babysengen, hvis den enten er defekt eller mangler dele. Kun løsedele godkendt af Ollie|s|Out er accepteret til
erstatning
• Behold manualen til senere brug
• Til forebyggelse af ulykker, bør børn ikke være tilstede under samling af møblet.
Congratulation on your new Ollie|s|Out baby bed. We wish your baby many years of pleasant sleep and
sweet dreams. For parents to feel satisfied with this new bed for their bundle of joy, we have put together
a few words, which are quite important. Please do stay tuned.
The baby bed comes with two high sides and a set of small barriers. The small barriers are for use later on
when the baby is no longer a baby but a small child.
The baby bed has three different height settings. The highest setting is only for newborns. As soon as the
baby can turn or roll, it is safest to set the platform for the mattress in the middle position. By the time the
baby can sit by him or herself, it is time to place the platform in the lowest position.
Now should the little cheeky ones begin adventure climbing over the high sides the small barriers become
quite handy to avoid any injuries.
Please follow the assembly instructions. After assembly check all screws and fitting to be sure there are no
loose parts in the bed that the baby could swallow which could lead to suffocation or choking.
Furthermore, an incorrect assembled bed may lead to accidents and pose a risk for serious injuries.
All screws must be re-‐tightened 2-‐3 weeks after assembly.
Maintenance and cleaning
Ollie|s|Out always recommend airing out the bedlinen every morning for that fresh feeling when it again
becomes nighttime.
Wipe the baby bed with a clean damp cloth; all excess water should be wiped off. Detergents are not
recommended.
Please note -‐ Exposure to direct sunlight may cause changes in the colors.
Product information
Ollie|s|Out baby bed meets the terms of the following safety standards:
EN 71-1: 2012
DIN EN 716-1
DS / EN 12221-2
F 2388
A / color-EN 71-3: 2013, EN 71-9: 2006, EN 71-11: 2006, EN 1122: 2001
B / Plywood
Č
SN EN 636-2, S, E1
(billede af advarselstrekant) WARNING
STOP… and read this -‐ It is very very important!
•
Please read the instructions carefully to ensure correct assembly, check frequently all screws and
fittings are accurately secured to ensure a safe environment for the baby
•
Please read the instructions carefully to ensure correct assembly, check frequently all screws and
fittings are accurately secured to ensure a safe environment for the baby
•
To avoid accidents from falling that may cause serious injuries always pay close attention to the
development of the child and adjust the height level accordingly
•
Always keep the baby bed away from open fire or other heat sources that may cause a risk of fire
•
Make sure to place the baby bed on a stabile surface
•
Do not leave any small items, strings, cords etc. in the bed or close enough for the baby to reach it
to avoid any risk of suffocation or strangulation
•
Use a mattress that has the same measurements as the baby bed 1200 mm x 600 mm to eliminate
all gaps that may cause entrapment of any body parts of the baby
•
Never use more than one mattress for the bed
•
The distance between mattress and the top of the baby bed should never be less than 200 mm.
•
Never use the baby bed should it be damaged or missing a part. Only spare parts permitted by
Ollie|s|Out are acceptable for replacement
•
Keep the instructions for later use
•
To avoid accidents. Children shouldn't be present during assembly.
A
C
D
G
H
E
B
A/B
2x
9x
1
2
5
6
3
2x
C/D
6x
G/H
8x
7x
5x
4
