Olivetti S2, User Manual, Page: 27 / 63

589402 User Manual 2-9
Figure 2-9 Extracting the feeder guide and inserting the filament
4. Adjust the temperature of the hot-end to the operating value for the type of filament loaded (for example,
200°C for PLA).
To adjust the temperature:

press once the jog dialer then select the Control menu.

turning the jog dialer, select the Temperature menu and press the dialer again.

to adjust the temperature of Extruder 1 select Nozzle or to adjust the temperature of Extruder 2 select
Nozzle 2, then press the jog dialer.

at this point, by turning the jog dialer you can set the temperature to the value you want.

at the end press the jog dialer again to confirm.