3LM
1-5-5
(2) Detaching and refitting PF paper size width switch 1, 2
Replace PF paper size width switch 1 and 2 as follows.
Caution:
After replacing paper feeder paper width switch, be sure to perform (4) Adjusting the position of the rack adjuster.
Procedure
1. Remove the cassette.
2. Remove two screws and 8-pin socket from
the rear of the cassette.
3. Detach the 8-pin connector of the PF paper
size width switch from the 8-pin socket.
4. Remove three screws holding the rack
adjuster.
5. While raising the cassette lift plate in the
direction of the arrow, remove the rack
adjuster.
Figure 1-5-8
Rack adjuster
Cassette
Cassette lift plate
Screw
Screw
Screw
8-pin connector
Screw
Screw
8-pin socket
Y1120
2
0-
4
Service Manual
Summary of Contents for PF-720
