E-
11
III. Installation procedures
1. Turn off the machine and unplug the power cord
from the power outlet.
2. Remove the user’s guide holder from the
machine.
3. Remove the cover from the lower portion on the
left side of the machine as shown in the
illustration.
4. Remove the guide from the exit section of the
machine.
5. Remove the output tray (OT-503) if it is mounted
on the machine.
Note:
For the removal procedure, see the installation
manual for the output tray (OT-503).
6. Remove the protective tapes of the horizontal
transport unit.
7. Remove the guide plate from the horizontal trans-
port unit (two screws).
8. Attach the furnished guide plate A to the horizon-
tal transport unit by inserting the two tabs into the
holes.
A07UIXC004DA
A0HRIXC048DA
A01GIXC082DA
A0HRIXC015DA
A0HRIXC019DA
A0HRIXC020DA
Y111090-1
Installation Manual
