FL X1 User Manual
19
4.
Device Date/Time: this windows shows the commands to
synchronize the device time
with a
server/PC:
I.
Manual: select it to synchronize manually with the PC clock
II.
Auto Sync with NTP: select and fill the server address in the columns to synchronize
automatically with the network server
2.3.4
ACCESS CONTROL SETTINGS
This section allows to set the interaction with an access control automatic system (eg turnstile,
automatic door, automatic bar, etc). Once connected to the access control system, the FL X1 will
send the trigger signal to enable a person’s access:
Unlock Time: this field allows to set the signal lasting time for open triggering
Unlock Time: this field allows to set the delay time for open triggering
Unlock signal: this field allows to select the interface to be used to send the trigger signal to
the access control system. Select “Relay” to use the Digital Output interface (KZ_Out; see
paragraph 2.4)
Warning signal: this field allows to enable/disable the warning signal sending to the access
control system. Select “Relay” to use the Digital Output interface (KZ_Out; see paragraph 2.4)
