background image

29

TX ERROR

The document was not sent correctly: press the 

 

key to turn off

the "

" error LED indicator and clear the message from the display,

and then send it again.

O

THER

 

ACOUSTIC

 

SIGNALS

Short 1-second signal

Transaction carried out successfully.

Intermittent 20-second signal

Prompt to lift the handset to answer a telephone call.

O

THER

 

MESSAGES

 

ON

 

THE

 

DISPLAY

CHECK PRINT OUT

1=EXIT    0=REPEAT

The fax machine has automatically tested the print head nozzles and
printed out the test sheet: check whether the printing quality is accept-
able and make your choice.

CONNECTING

The fax machine is connecting to your correspondent's fax machine.

DIALLING

The fax machine is dialling the number of the correspondent you
called.

DOCUMENT READY

You have inserted the document in the ADF correctly.

LIFT HANDSET

The correspondent has made a talk request: lift the handset to start
the conversation.

LINE ON HOLD, PRESS HOLD

You have put a telephone call on hold by pressing the 

 

key:

press the 

 key again to resume the conversation with the corre-

spondent.

MEMORY TX

You have set transmission from the memory.

NEW PRINT HEAD?, 1=YES   0=NO

You have installed a disposable print head for the first time or you
have removed and reinstalled it: select the relevant answer. If you
answer yes but the print head is not new, the fax machine will not
detect the out of ink condition.

OFF HOOK

You have engaged the line by lifting the handset of the telephone
connected.

POLL RX:  HH:MM

You have made a transmission request (Polling reception).

PRINTING

The fax machine is printing a report or a list.

RX COMPLETED

The document was received correctly.

RX INTERRUPTED

You aborted reception by pressing the

 

 key.

STORING

The fax machine is saving the pages of the document to be copied.

TRANSMITTING

A document is being sent.

TRANSMITTING....

A document is being sent.

TX AT:  HH:MM

You have set transmission at a preset time (broadcast transmission).

TX COMPLETED

Transmission was completed successfully.

TX INTERRUPTED

You aborted transmission by pressing the 

 key.

Summary of Contents for Fax-Lab 101

































































Reviews: