23
ENGLISH
Printing an All PLU Dump Report
Proceed as follows to print a PLU report:
1. Slide the control switch to the PRG position.
2. Press the [PLU] key to print the list.
3. Slide the control switch to the OFF position to exit the program mode.
Shown below is an example PLU dump report.
Programming a Manager Password
You can define a manager password to prevent unauthorized access to
the machine's programming mode (PRG) and Z mode. Since the
management reports taken in the Z mode reset transaction totals to zero, a
management password prevents the accidental resetting of these totals by
unauthorized personnel.
Defining the PRG and Z Mode Manager Password
Proceed as follows to define a manager password that grants access to
the PRG and Z modes:
1. Slide the control switch to the PRG position.
2. Type your 4-digit manager password and then press the [Charge] key.
The password entered is displayed and printed.
NOTE: If you define a manager password of 0000, the password security
protection feature will not work.
Example: Define manager password 9876 for the PRG and Z modes.
Type/Press:
[9876] + [Charge]
NOTE: If you set a PRG and Z mode manager password, you will not be
able to alter your program or print your management reports until
the correct password is entered. If you attempt to make changes
to the machine's configuration or to print a Z management report,
the message "SEC Code" is displayed prompting you to enter the
password.
Clearing the PRG and Z Mode Manager Password
Proceed as follows to clear the manager password that grants access to
the PRG and Z modes:
1. Slide the control switch to the PRG position.
2. Type [0] + [0] + [0] + [0] and press the [Charge] key.
PLU number
Fixed PLU
programming status
Price with
associated VAT
PLU price with
no VAT
Open PLU
programming status
Department
the PLU is
linked to
Summary of Contents for ECR 5200
Page 65: ...Code 506608Q...
