3-34
Sending Faxes > Interrupt Send
Interrupt Send
During communication, when you scan originals by selecting direct transmission, you can use interrupt send. Even when
the communication is prolonged due to broadcast transmission or a next transmission being scheduled, the machine will
first send originals for which interrupt send has been set.
1
Select [Fax] on the Home screen.
2
Load the originals to be sent using Interrupt Send.
3
Select [Direct].
For operation of direct transmission, refer to the following:
4
Set the destination, and press the [Start] key.
The originals are left in queue, and the transmission will start when transmission becomes
possible.
5
When the interrupt send is completed, the waiting communication and
standby transmission will automatically resume.
NOTE
When the total number of standby transmissions and delayed transmissions has already reached 210, you cannot use
interrupt send.
Fax Direct Transmission (page 3-30)
NOTE
When [
On
] is selected in
[Destination Check before Send]
, a destination confirmation
screen is displayed when you press the [
Start
] key.
Confirmation Screen of Destinations (page 7-13)
To cancel transmission while waiting for interrupt send, select the [
Stop
] key on the
operation panel or [
Cancel
] on the touch panel.
