manualshive.com logo in svg

Olivetti d-Copia 284MF, Service Manual

Share
Download
Olivetti d-Copia 284MF Service Manual Download Page 97

2JN

1-3-69

U904

Checking/clearing the service call counts
Description

Displays or clears the service call code counts by types.

Purpose

To check the service call code status by types. Also to clear the service call code counts after replacing con-
sumable parts.

Method

1. Press the start key.
2. Select the item. The screen for executing is displayed.

Method: Displays/clears the service call counts

1. Select [COUNT] and press the start key. The count for service call detection by type is displayed.
2. Change the screen using the cursor up/down keys.
3. To clear the counts for all, select [ALL CLEAR].
4. Press the start key. The count is cleared.

The individual counter cannot be cleared.

5. To return to the screen for selecting an item, press the stop key.

Method: Displays the total service call counts

1. Select [TOTAL COUNT] and press the start key. The total number of service call counts by type is dis-

played.

2. Change the screen using the cursor up/down keys.

The total number of service call count cannot be cleared.

3. To return to the screen for selecting an item, press the stop key.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

U905

Checking/clearing counts by optional devices
Description

Displays or clears the counts of DP.

Purpose

To check the use of DP. Also to clear the counts after replacing consumable parts.

Method

1. Press the start key.

Clearing

1. Select the item to be cleared using the cursor up/down keys.

To clear the counts for all, select [ALL CLEAR].

2. Press the start key. The count is cleared.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Maintenance

item No.

Description

Display

Description

COUNT

Displays/clears the service call counts

TOTAL COUNT

Displays the total service call counts

Display

Description

ADP

No. of single-sided originals that has passed through the DP

RADP

No. of double-sided originals that has passed through the DP

Y111030-4 Service Manual 

Summary of Contents for d-Copia 284MF




























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands