Olivetti d-Copia 283MF, Operation Manual

Page: 318 / 438

Default Setting (System Menu)
8-130 OPERATION GUIDE
2
The System menu appears.
3
Press the U or V key to select [Network Setting].
4
Press the OK key. The Network Setting menu
appears.
5
Press the
U
or
V
key to select [TCP/IP Settings].
6
Press the OK key. The TCP/IP Settings menu
appears.
7
Press the U or V key to select [IPv6 Setting].
8
Press the OK key. IPv6 Setting appears.
9
Press the
U
or
V
key to select [On] or [Off].
10
Press the OK key. Completed. is displayed and the
screen returns to the TCP/IP Settings menu.
NetWare Setup
Select the NetWare network connection. After that, select frame types for NetWare network from Auto,
Ethernet-II, 802.3, 802.2, or SNAP. The default settings is "
Off ".
Use the procedure below to setup the NetWare setting.
System: a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit ]
1
Network Setting
Network Setting:
a b
*********************
2
NetWare
3
AppleTalk
[ Exit ]
1 TCP/IP Settings
TCP/IP Settings: a b
*********************
2 IPv4 Setting
3 IPv6 Setting
[ Exit ]
1 TCP/IP
IPv6 Setting:
a b
*********************
2
On
[ Exit ]
1
*Off