manualshive.com logo in svg

Olivetti d-COLORMF2604, Operation Manual

Share
Download
Olivetti d-COLORMF2604 Operation Manual Download Page 90

FAX Operation (Advanced) 

4-30

After completing the settings, click 

Submit

 to save the settings.

Editing Destinations

FAX > Common > Forward > Forward > Edit

Use this page to edit destinations.

The settings available on the Forward - Edit page are shown below.

Forward Destination 
Settings

Displays the registered destinations. Click the checkboxes 
for the destinations to be enabled so that they are ticked. To 
change a destination, click the name of the destination to be 
changed. The Forward - Edit page is displayed.
Change the destination information and click 

Submit

.

Delete

To delete a destination, click the checkbox for the destination 
to be deleted so that it is ticked and then click 

Delete

.

Item

Description

Address Type

Select the destination type.
•

E-mail

•

SMB

•

FTP

•

FAX

Item

Description

Summary of Contents for d-COLORMF2604














































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands