Olivetti d-COLOR MF283 Quick Manual Download Page 66

Page: 66 / 190

2-34

d-COLOR MF283/MF223

Loading paper

2.8

2.8.2

LCT (built-in)

Up to 2500 sheets of plain paper can be loaded into the

LCT (built-in)

. The

LCT (built-in)

is an option.

Applicable paper types

Plain paper, single-side-only paper, special paper, thick paper, letterhead, colored paper, and recycled paper

How to load paper

Pull out the tray.

NOTICE

Be careful not to touch the

Film

Load paper into the right tray.

Load paper into the tray with the print side facing up.

NOTICE

Do not load the tray with paper of a size other than that previ-
ously specified. To change the paper size, contact your service
representative.

Load paper into the left tray.

Load paper into the tray with the print side facing up.

When loading paper other than plain paper, specify the paper type.

For details, refer to the User's Guide DVD.

Max.

Summary of Contents for d-COLOR MF283































































































































































































Search results

Summary of Contents for d-COLOR MF283

Reviews:

Related manuals for d-COLOR MF283

Brands by name

Popular brands

Olivetti d-COLOR MF283, Quick Manual

Search results

Summary of Contents for d-COLOR MF283

Reviews:

Related manuals for d-COLOR MF283

Brands by name

Popular brands