Olivetti d-COLOR MF283 Quick Manual Download Page 65

Page: 65 / 190

d-COLOR MF283/MF223

2-33

2.8

Loading paper

2.8

Loading paper

2.8.1

Loading paper in Tray 1 to Tray 4

Up to 500 sheets of plain paper can be loaded into each tray.

Tray3

and

Tray4

are optional.

Applicable paper types

Plain paper, single-side-only paper, special paper, thick paper, letterhead, colored paper, and recycled paper

How to load paper

Pull out the tray.

NOTICE

Be careful not to touch the

Film

Slide the

Lateral Guide

to fit the size of the paper to be load-

ed.

Load paper into the tray.

Load paper into the tray with the print side facing up.

When loading paper other than plain paper, specify the paper type.

For details, refer to the User's Guide DVD.

Summary of Contents for d-COLOR MF283































































































































































































Search results

Summary of Contents for d-COLOR MF283

Reviews:

Related manuals for d-COLOR MF283

Brands by name

Popular brands

Olivetti d-COLOR MF283, Quick Manual

Search results

Summary of Contents for d-COLOR MF283

Reviews:

Related manuals for d-COLOR MF283

Brands by name

Popular brands