Olivetti d-COLOR MF283 Quick Manual Download Page 136

Page: 136 / 190

3-60

d-COLOR MF283/MF223

Using a USB memory device

3.6

Using a USB memory device

3.6.1

Printing data in a USB memory device

Data saved in the USB memory device can be printed. This function is useful when printing data created on
a computer that is not connected to the network.

Available USB memory device

Compatible with USB version 2.0/1.1 interface

Formatted in FAT32

Without security function added, or with security function that can be turned off as required

There is no upper limit for the memory size.

Available printing file types

PDF, Compact PDF, JPEG, TIFF, XPS, Compact XPS, OOXML (.docx/.xlsx/.pptx), and PPML
(.ppml/.vdx/.zip)

Other file types are not supported on this machine.

Printing data

Connect a USB memory device to this machine.

NOTICE

Do not use a USB device other than a flash-memory device.

Tap [Print a document from External Memory.].

Summary of Contents for d-COLOR MF283































































































































































































Search results

Summary of Contents for d-COLOR MF283

Reviews:

Related manuals for d-COLOR MF283

Brands by name

Popular brands

Olivetti d-COLOR MF283, Quick Manual

Search results

Summary of Contents for d-COLOR MF283

Reviews:

Related manuals for d-COLOR MF283

Brands by name

Popular brands