d-Color MF4003/MF3303
F DISASSEMBLY/REASSEMBLY > 4.
d-Color MF4003/MF3303
F-20
4.2.9 ADF
1.
Remove the rear cover.
[1]
[4]
[1]
[2]
[3]
2.
Remove the cable and ground wire from four wire saddles [1], and disconnect
the connector [2].
3.
Remove the screw [3], and remove the plate [4].
[1]
[3]
[3]
[2]
[4]
[3]
4.
Remove the cable from the edge cover [1], and disconnect the connector [2].
5.
Remove five screws [3], and remove the plate [4].
[3]
[1]
[2]
[4]
6.
Remove the screw [1], and disconnect two connectors [2] and the flat cable [3].
NOTE
▪ When removing the flat cable [3], unlock the connector [4], and
remove the cable together with the connector.
[2]
[1]
7.
Remove the screw [2] while lifting up the ADF [1], and remove the ADF [1].
8.
To reinstall, reverse the order of removal.
4.2.10 CIS module
1.
Remove the rear cover.
2.
Remove the ADF.
3.
Remove the scanner upper cover.
Service Manual
Y119930-3
Summary of Contents for d-Color MF 4003
