DU7130C-
N
Installation Instructions
THIS BASIN MUST BE INSTALLED
IN ACCORDANCE WITH
AS/NZ 3500.2 AND LOCAL REGULATIONS. THIS BASIN MUST
BE INSTALLED
BY A LICENSED PLUMBER
.
2022-11/Version 1.0
Before you begin
Check the product for damage, if the product is damaged return to
the
store of purchase.
Check the product is complete with all components required to install.
This product is to
only be installed by a licensed plumber,
and must be installed in accordance with these
instructions,
failing to do so will void warranty.
Installation
i
nstructions
Installation Instructions
1. Determine where on the bench top the basin is to be installed.
2. Place the basin in position and check to ensure the basin waste outlet position does
not interfere with drawers, internal walls or waste connection pipe work.
3. Mark the waste hole position on the bench top, using a suitable cutting devise based
on bench top material, cut a hole in the bench top large enough (recommended hole size:
LxW:400x360mm) to accommodate the waste being used.
4.
Fit waste to basin as per waste installation instructions.
5. Run a bead of plumbers grade silicone around the underside edge of the basin.
6. Fit basin to bench top, allow silicone to set before proceeding with waste pipe installation.
