8
ASSEMBLY INSTRUCTION:
(Fig.A) (Fig.B) (Fig.C)
Step 1-1.1 Open the package and take out the foam. (See Fig.A)
Step 1-1.2 Stick the foam around the reducing collector flange. (See Fig.B)
Step 1-1.3 Use a screwdriver to make a hole through the foam to allow the Hex. Head bolts through.
(See Fig.C)
STEP 1-2.
Place the main housing (A) upside down.
Assemble the reducing connector (11) together with the
main housing and tighten with flange bolts (64) and nuts.
(65)
STEP 1-3.
Assemble the upper supports (7) and lower supports (6)
together with flange bolts (17) then tighten the stands to
the housing (A) with flange bolts (17).
See (Fig.1)
(Fig.1)
Step 1-4.
Open the package and take out the foam.
See (Fig.D)
(Fig.D)
Summary of Contents for 7155
Page 11: ...11 EXPLODED DIAGRAM...
