0704S20002
1-1
SAFETY INSTRUCTIONS
WARNING
VARIOUS SAFETY DEVICES AND METHODS OF GUARDING HAVE BEEN
PROVIDED ON THIS MACHINE. IT IS ESSENTIAL HOWEVER THAT MACHINE
OPERATORS AND MAINTENANCE PERSONNEL OBSERVE THE FOLLOWING
SAFETY PRECAUTIONS. IMPROPER INSTALLATION, MAINTENANCE, OR
OPERATION OF THIS EQUIPMENT COULD CAUSE SERIOUS INJURY OR DEATH.
1. Before attempting to operate your slicer read this manual. Never allow an untrained
person to operate this machine.
2. Connect the machine to a properly grounded electrical supply that matches or
exceeds the requirements shown on the electrical specification plate on the machine.
Follow all the specifications of local electrical codes. Always unplug the machine
when it is not in use.
3. Always make sure the machine has been disconnected from the power supply and
locked out, before cleaning or servicing.
4. Never stick your hand or any other objects into either end of the chute. Keep your
hands away from the moving parts of the machine.
5. Never attempt to adjust or service this machine until your are
SURE
the knife has
stopped.
6. Always make sure the knife is not rubbing or hitting any metal components before re-
starting the machine.
7. All guards must be in place before starting the machine.
8. Handle knife blades with care. Do not touch the moving knife.
9. Use only proper replacement parts.
10. In addition to these general safety instructions, also follow the more specific safety
instructions given for the different areas of the machine in the operating instructions.
WARNING
DO NOT USE FOR OTHER THAN ORIGINALLY INTENDED PURPOSE.