manualshive.com logo in svg

Oliver 702-N, User'S Operating And Instruction Manual, Page: 4 / 24

Share
Download
Oliver 702-N User'S Operating And Instruction Manual Download Page 4

                                   

MODEL 702-N, 702-NSE and 702-NSS BUN SLICERS

 

  

0702S20034

 

 

SAFETY INSTRUCTIONS 

 
 

Every effort has been made by Oliver Products Company to provide you with a safe 
machine.  It is essential, however, that machine operators and maintenance personnel 
observe the following safety precautions. 
 
1.  Before attempting to operate your slicer read this manual.  Never allow an untrained 

person to operate this machine. 

 

 

2.  Make sure that the machine is only connected to a properly grounded electrical 

supply source of sufficient capacity for the load the slicer will put on it.  Always 
unplug the machine when it is not in use. 

 

 

3.  Always make sure the machine has been disconnected from the power supply 

before cleaning or servicing. 

 

 

4.  Never stick your hand or any other objects into either end of the chute.  Keep your 

hands away from the moving parts of the machine. 

 

 

5.  Never attempt to adjust or service this machine until your are 

SURE

 the blade has 

stopped. 

 

 

6.  Always make sure the knife is not rubbing or hitting any metal components before re-

starting the machine. 

 

 

7.  All guards must be in place before starting the machine. 
 

 

8.  Handle knife blades with care.  Do not touch the moving knife. 
 

 

9.  Use only proper replacement parts. 
 

 

10. In addition to these general safety instructions, also follow the more specific safety 

instructions given for the different areas of the machine in the operating instructions. 

Summary of Contents for 702-N

























Reviews:

No comments