background image

2

Oliver Machiner

y

 

Seattle, 

WA  | 

 Copyright 2005 | www.olivermachinery.net

WELCOME!

This manual has been prepared for the owner and operators of a 6910 Spindle Sander. Its purpose, aside 

from machine operation, is to promote safety through the use of accepted correct operating and maintenance 

procedures. Completely read the safety and maintenance instructions before operating or servicing the machine. 

To obtain maximum life and efficiency from your OLIVER Sander, and to aid in using the machine safely, read this 

manual thoroughly and follow instructions carefully.

Warranty & Service

OLIVER warrants every product it sells. If one of our tools needs service or repair, please contact Oliver 

Machinery before embarking on the repair.  Failure to do so could void the warrantee. To contact Oliver 

Machinery, please call 1-800-559-5065, or visit www.olivermachinery.net.

More Information

Remember, OLIVER is consistently adding new products to the line. For complete, up-to-date product information, 

check with your local OLIVER distributor, or visit www.olivermachinery.net

OLIVER Warranty

OLIVER makes every effort to assure that its products meet high quality and durability standards and warrants 

to the original retail consumer/purchaser of our products that each product be free from defects in materials and 

workmanship as follow: 2 YEAR LIMITED WARRANTY ON ALL PRODUCTS UNLESS SPECIFIED OTHERWISE. 

This Warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or accidents, 

normal wear-and-tear, repair or alterations outside our facilities, or to a lack of maintenance. 
OLIVER LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD SPECIFIED ABOVE, FROM THE DATE THE 

PRODUCT WAS PURCHASED AT RETAIL. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR 

MERCHANTIBILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON 

HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. 

OLIVER SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR 

INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF 

OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXLUSION OR LIMITATION OF INCIDENTAL OR 

CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
To take advantage of this warranty, the product or part must be returned for examination, to Oliver headquarters 

in Seattle. An explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, 

we will either repair or replace the product, or refund the purchase price if we cannot readily and quickly provide 

a repair or replacement, if you are willing to accept a refund. We will return repaired product or replacement at 

OLIVER’S expense, but if it is determined there is no defect, or that the defect resulted from causes not within 

the scope of OLIVER’S warranty, then the user must bear the cost of storing and returning the product. This 

warranty gives you specific legal rights; you may also have other rights which vary from state to state. OLIVER 

sells through distributors only. Members of the OLIVER reserve the right to effect at any time, without prior notice, 

those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason 

whatsoever.

Summary of Contents for 6910




















Reviews: