MODEL 688-N
0688S20004
3-2
Oven Setup
Ovens may be mounted to a fixed surface, attached to an “Oliver” oven rack with casters
or stacked on either a Oliver Model 690 Oven or and Oliver Model 695 Proofer. For
associated mounting heights for the above options see page 2-2.
CAUTION
USE CARE WHENEVER MOVING OVENS MOUNTED ON RACKS AS THEY ARE TOP
HEAVY AND PRESENT A TIPPING HAZARD.
Ovens attached to “Oliver” oven racks must be securely fixed to the rack with bolts.
Stacked units should be setup as shown on page 2-2 being sure that the alignment pins
on the top of the lower unit are securely positioned into the holes in the base of the upper
oven.
Electrical Connection
WARNING
THE OVEN MUST BE CONNECTED TO A PROPERLY GROUNDED ELECTRICAL
SOURCE OF THE SAME RATING AS THE MACHINE. FAILURE COULD RESULT IN
AN ELECTRICAL SHOCK WHICH MAY CAUSE INJURY OR DEATH.
WARNING
ALL WIRING AND ELECTRICAL REPAIRS SHOULD BE DONE BY A QUALIFIED
ELECTRICIAN. FAILURE TO DO SO MAY CAUSE SERIOUS INJURY OR DEATH.
CAUTION
SPECIAL HEAVY DUTY ELECTRICAL SERVICES AND WALL DISCONNECTS MUST
BE PROVIDED FOR SAFE OPERATION OF THE OVEN.
The following service requirements are recommended, dependent on the voltage of the
unit you have purchased. Your oven’s requirements can be found on the nameplate
attached to its rear surface.
