Oliver 4910 Owner'S Manual Download Page 2

Warranty 

 

Thank you for your purchase of a genuine Oliver woodworking machine.  Oliver Machinery has made 
every attempt to provide a machine that is safe and durable.   
 
All Oliver products are guaranteed, to the ORIGINAL RETAIL CUSTOMER, to be free from defects for 
TWO YEARS FROM THE DATE OF PURCHASE.  Oliver Machinery will repair or replace, at its option, 
any component that fails under normal use.  Please note that the customer is responsible for returning the 
failed component to Oliver Machinery prepaid for inspection.  
 
This warranty does not cover damages caused by misuse, accident, unauthorized repair, alteration or 
improper maintenance.   
 
 

Warning 

 
Read this manual thoroughly before operating the machine.  Oliver Machinery disclaims any liability for 
machines that have been altered or abused.  Oliver Machinery reserves the right to effect at any time, 
without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem 
necessary for any reason whatsoever. 
 
 

For More Information 

 
Oliver Machinery is always adding new Industrial Woodworking products to the line.  For complete, up-to-
date product information, check with your local Oliver Machinery distributor, or visit 
www.olivermachinery.net 

 

 

2

Summary of Contents for 4910















Reviews: