Oliver 1908, User'S Operating And Instruction Manual

Page: 18 / 46

11/12/09 1908S20001
1-17
NOTE
·
Never run the machine with trays and no film. Doing so can possibly cause a jam
because the trays can stick to the heated platen and be pulled out of the tray
carriers.
4. Pull the black palm button up to start the machine running. After a few trays
come out of the machine, stop and check to see that the seals are acceptable.
Poor seals may be caused if the dwell time of heated platen is set too short. The
machine was shipped from the factory with the dwell time set properly. However,
it could have come out of adjustment during shipment. The 0.1-3 second dwell
time adjustment knob should be set with indicator arrow between the letter
“B &
C”
as shown in the illustration below. Do not turn the knob so that the indicator
arrow goes past the letter
“F”
and before the letter
“A”
. The closer the indicator
arrow is to the
“A”
, the shorter the dwell time.
NOTE
·
Dwell timer with (0.1-30s) should be set between A &B. The indicator arrow
should
not
be turned past these letters.
INDICATOR ARROW