Oliso TG-1000 User Manual Download Page 13

11

One (1) Year Limited Warranty

Oliso, Inc. warrants that for a period of one year from the date of the original purchase, this product will be free from defects 
in material and workmanship, when utilized for normal household use. Oliso, Inc. will repair or replace this product or any 
component of the product found to be defective during the warranty period without charge to the customer. If a replacement 
product is sent, it will carry the remaining warranty of the original product. Replacement will be made with a new or 
remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of 
equal or greater value. This is your exclusive warranty.

This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the 
original sales receipt. Proof of purchase is required to obtain warranty performance. Oliso, Inc. dealers or retail stores selling Oliso, 
Inc. products do not have the right to alter, modify or in any way change the terms and conditions of this warranty.

The liability of Oliso, Inc. is limited solely to the cost of repair or replacement of the product at its option. This warranty does not 
cover normal wear of parts and does not apply to any product that has been tampered with or used for commercial purposes. 
This warranty does not cover damage caused by misuse, abuse, use on improper voltage or current, use contrary to the operating 
instructions, negligent handling or damage due to faulty packaging or mishandling in transit. This warranty does not cover 
damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any of 
its parts, which have been performed by a repair person not authorized by Oliso, Inc. Further, the warranty does not cover Acts of 
God such as fire, flood, hurricanes, and tornados.

This warranty is extended to the original purchaser of the product and excludes all other legal and/or conventional warranties. 
The responsibility of Oliso, Inc. is limited to the specific obligations expressly assumed by it under the terms of the limited 
warranty. In no event shall Oliso, Inc. be liable for any incidental or consequential damages caused by breach of any express, 
implied or statutory warranty or condition.

Except to the extent prohibited by law, any implied warranty or condition of merchantability or fitness for a particular purchase is 
limited in duration to the duration of the above warranty. Oliso, Inc. disclaims all other warranties, conditions, or representations, 
express, implied, statutory or otherwise. In no event shall Oliso, Inc. be liable for any indirect, special, incidental or consequential 
losses or damages (including but not limited to interruption of business or loss of business or profit) resulting from the use of 
or inability to use the product, any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by 
any other party. Some states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or 
limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you.
If you have any question regarding this warranty or would like to obtain warranty service, please email Oliso, Inc. at 
[email protected], and a service center address will be provided to you. If you have further questions, you may call 
1-800-899-5157.

© 2005-2007 Oliso, Inc. All rights reserved. Touch&Glide™, Auto-Lift System™, Auto-Lift™, Flow Glide™, Flip 
Funnel™, and Smart Touch™ are trademarks of Oliso Inc. Oliso

R

 is a registered trademark of Oliso Inc. 

U.S. Patent No. #6,453,587 B1, #6,925,738 B2. Patent Pending

#40000014 <05/08> Printed in China.

www.oliso.com 

EN

Summary of Contents for TG-1000



























Reviews: