This iron is designed to be
used with regular tap water.
If your water is over 12 grams
of hardness, we recommend
using either inexpensive
bottled spring water or
mixing half tap water with
half distilled water.
100% distilled water
as this can cause the
iron to spit and leak.
Alternatively, fill directly from a
faucet holding the iron horizontally.
Make sure iron is unplugged.
unplug iron
switch off
open port
fill (cup included)
Two fill cups equal the max
capacity of the water tank.
Fill the tank past the
MAX
fill
line on the side of the iron.
Close the port when done.
If you need to add water during ironing, unplug the iron and repeat the above
steps. After filling, make sure the iron is fully reheated before ironing.
step 1
step 2
step 3
DO NOT
NEVER USE
MAX
filling water tank
max fill line
water
recommendations
alternative filling
7
