This iron is designed to be used with
regular tap water. If your water is
over 12 grams of hardness, we
recommend using either inexpensive
bottled spring water or mixing half
tap water with half distilled water.
If storing the iron for more
than two days, please
remember to empty your
tank.
100% distilled water
as this can cause the iron to spit and leak.
Alternatively, fill directly from a
faucet holding the iron
horizontally.
Make sure iron is unplugged.
unplug iron
switch off
open port
fill (cup included)
Two fill cups equal the max
capacity of the water tank.
Fill the tank past the MAX fill
line on the side of the iron.
Close the port when done.
If you need to add water during ironing, unplug the iron and repeat the above steps.
After filling, make sure the iron is fully reheated before ironing.
step 1
step 2
step 3
DO NOT
NEVER USE
filling water tank
max fill line
alternative filling
7
MAX
water
recommendations
emptying
the tank
anti-scale
