>>WARNING<<
Suggestions when using Oliser’s Inkjet Filling Machines
Oliser suggests using water when operating the machine for the first time
A pencil eraser can be used to clean the circuits on a cartridge
!
!
Maintenance :
Insert all Exhaust Lines into your specific catch receptable
Note :
Empty your catch buckets once they become 1/3 full. This
will optimize the air flow in your equipment and allow the System to per
-
form correctly.
Note :
Use separate catch buckets for waste and reusable liquids.
Flush your equipment with warm distilled water daily.
Simply use an empty cartridge to draw the distilled water through
your equipment in place of ink.
This will keep any sediment from clogging the interior of the equip
-
ment.
Cleaning of VAC generator :
Take out the VAC generators connectors, put the VAC generator
warm distilled water or cleaning solutions around five minutes, then apply
compressed air through connectors one by one 3-5 seconds. Reconnect the
connectors to the VAC generator and test the vacumm level before install
into the machine.
Maintenance procedure must be done regularly every
week.
OLISER is NOT responsible for the problems which is
caused by un-maintenance...
To Order Call: +90 312 417 72 75
/
!
!
Summary of Contents for MS Soho
Page 18: ...TUBE REPLACEMENT OF MOTORS...
