13
IP C
AMERA
OC 1280
CONNECTING THE CAMERA
Assembling the Cable Box
After assembling the camera you can stow the connec-
tion cable and, if necessary, the receiver in the cable box
in order to protect the remaining length of the cable from
unauthorised access.
Observe the following points when selecting the assem-
bly location.
■
The cable box must be in the direct vicinity of the
camera.
■
The power cable can be laid slightly inwards.
■
(Option) The receiver must be within range of your
alarm system.
Pay attention that you do not damage electric cables or
gas pipes.
W
ARNING
! Risk of fatal injury from electric shock or
gas explosion! During installation, pay attention to
the possibility of electrical cables and gas pipes
running in the walls.
1
Use the holes in the cable box as a drilling template
and drill four suitable holes in the wall or ceiling.
2
Loosen the screws in the lid of the cable box using
an appropriate screwdriver and remove the cable
box lid.
3
Drill another suitable hole in the wall or ceiling close
to the cable box through which to feed the power
cable out from the interior to the cable box.
4
Insert the respective dowels in the drill holes for the
cable box.
5
Pay attention that the
cable glands face downwards
and assemble the cable box using appropriate
screws.