Olimpia splendid UNICO EASY S1, Instructions For Use And Maintenance Manual

Page: 58 / 180

ENGLISH
EN - 24
6 - INCONVENIENCES AND POSSIbLE REMEDIES
Malfunction Cause What do i do?
The appliance doesn’t work. Current failure Wait for the current to be restored.
the unit is disconnected from the
current.
Check that the plug is inserted in the
wall socket.
The appliance doesn’t switch on. too much water has collected inside
the air conditioner.
drain the water off by removing the
plug (28). Call the assistance
Centre if this alarm occurs too often.
timer is on. Switch off the timer.
The appliance only works for a
small amount of time.
the temperature set is too close to
ambient temperature.
lower the temperature set.
Suction of outside air is obstructed. remove the obstructions.
Call the Service Centre.
The appliance doesn’t cool effi -
ciently.
The air filters are clogged by dust,
fluff or animal hair.
Switch off the appliance and clean
the filters following the instructions.
temperature setting is too high. reduce the set temperature.
the windows or doors of the room
are open.
make sure all the windows and the
doors are closed.
the room area is too large. Check the cooling area again.
Heat sources are present inside the
room.
remove the heat sources if possible.
The appliance is noisy and vi-
brates excessively.
the appliance bearing surface is not
levelled.
Place the appliance on a flat and
levelled surface.
The air filters are clogged by dust,
fluff or animal hair.
Switch the appliance off and clean
the filters following the instructions.
The appliance emits an
abnormal sound.
this sound is caused by the refriger-
ant flow inside the unit.
it is totally normal.
Water leaks from the conditioner
during transport.
the conditioner has been tilted or
laid flat.
empty water before moving the
appliance.
In cooling, night-time or
automatic mode, minimum
speed cannot be selected.
ambient temperature too low. air conditioner behaviour is normal.
if the problem has not been solved, please contact the nearest technical assistance service.
Please give detailed information about the malfunction and on the equipment version.