Olimpia splendid Unico Air R410A, Instructions For Use And Maintanence

Page: 53 / 489

UNICO AIR ON/OFF
EN - 5
ENGLISH
0.3 - GENERAL WARNINGS
1. This document is restricted in use to the terms of the law and may
not be copied or transferred to third parties without the express
authorization of the manufacturer, OLIMPIA SPLENDID.
Our machines are subject to change and some parts may appear
different from the ones shown here, without this affecting the text of
the manual in any way.
2. Read this manual carefully before performing any operation (instal-
lation, maintenance, use) and follow the instructions contained in
each chapter.
3. Make all personnel involved in transport and installation of the ma-
chine aware of these instructions.
4. THE MANUFACTURER IS NOT RESPONSIBLE FOR DAMAGES TO
PERSONS OR PROPERTY CAUSED BY FAILURE TO FOLLOW THE
INSTRUCTIONS IN THIS MANUAL.
5. The manufacturer reserves the right to make any changes it deems
advisable to its models, although the essential features described
in this manual remain the same.
6. The installation and maintenance of air-conditioners like this one
may be hazardous as they contain a cooling gas under pressure as
well as powered parts.
Therefore, the installation, first startup and subsequent maintenance
should be carried out exclusively by authorized, qualified personnel.
7. Failing to comply with the instructions contained in this manual, and
using the unit with temperatures exceeding the permissible temper-
ature range will invalidate the warranty.
8. Routine maintenance of the filters and general external cleaning can
be done by the user as these operations are not difficult or dangerous.
9. During installation and maintenance, respect the precautions indicat-
ed in the manual, and on the labels applied inside the units, as well
as all the precautions suggested by good sense and by the safety
regulations in effect in your country.
10. Always wear gloves and protective goggles when performing any
operations on the refrigerating side of the units.
WHEN USING ELECTRICAL EQUIPMENT, BASIC SAFETY
PRECAUTIONS MUST ALWAYS BE FOLLOWED IN ORDER TO
REDUCE RISKS OF FIRE, ELECTRIC SHOCKS
AND INJURY, INCLUDING THE FOLLOWING: