44
UNICO-HE
Use button T3 to select Night well-being Mode, which
includes the following functions:
- Gradual increase of the temperature set for cooling.
- Gradual reduction of the temperature set for heating
(only HP models).
- Reduction of noise level.
- Lower energy consumption at night.
To select Night well-being mode press button T3 after
selecting the operating mode using button T4 and
setting the temperature using button T7.
Ideally, you should start night well-being mode
operation just before you fall asleep.
In cooling mode, the set temperature is held for one hour
after starting Night well-being mode operation.
For the next hour, the setting is allowed to increase
gradually up to 2°C over the original setting, while the fan
speed setting is low.
After the second hour, the temperature and fan speed
settings are not changed.
In heating mode, the set temperature is held for one hour
after starting Night well-being mode operation.
For the next hour the setting is lowered gradually to 4°C
below the original while the fan speed setting is low.
After the second hour, the temperature and fan speed
settings are not changed.
Night well-being mode operation is not available for
dehumidifying only.
Night well-being mode operation can be halted at any
time (ideally when you wake up in the morning) by
pressing button T3 again.
At this stage the temperature and fan speed settings
made prior to starting Night well-being mode operation
go back into effect.
The air conditioner logic provides the user with a choice
of two operating programs that can be set to start and
stop at programmed times, for example you might want
the air conditioner to start shortly before you return home
so that it is cool when you get there.
To use these functions it is first necessary to set the exact
time on the remote control and then set the time for the
programs to start.
To set the exact time proceed as follows:
a) Press button T6 Time and Program Setting, as many
times as necessary to display the hour indicator (H).
b) Press the toggle button T7 to increase or decrease
the numerical display until it shows the exact hour.
c) Press button T6 again to display the minute
indicator (M).
d) Press toggle button T7 to increase or decrease the
numerical display until it shows the exact time in
minutes.
3.4.12
Night well-being
mode
3.4.13
Setting programs
for operation
3.4.14
Setting of correct
time
Fig. 37
Night well-being mode
Fig. 38
Setting of correct time
F
A
N
S
E
T
+
-
T3
T7
T4
H
F
A
N
S
E
T
+
-
M
F
A
N
S
E
T
+
-
T7
T6
T7
T6
Summary of Contents for UNICO 11 HE
Page 49: ......
