INTRODUCTION
The dehumidifier is fitted with an electronic logic system which controls operation and optimises consumption
and performance. The keys and information on the control panel have the following meanings
1) Start / Stand-by key
2) Desired humidity / temperature increment key
3) Desired humidity / temperature decrement key
4) Humidity indication key
5) Detected ambient humidity(blinking) / Selected humidity
6) Condensate collection tank full or tank shortage (LED ON),
Continuous discharge function enabled (LED BLINKING with frequency 1.25Hz).
Tank empty/present with continuous discharge disabled (LED OFF).
7) Operating mode selection key
8) DRYING MODE indications (LED ON).
9) DEHUMIDIFICATION MODE indications (LED ON).
SELECTING FUNCTIONS
Stand-by. Key (1)
This key activates the dehumidifier or puts it in Stand-by mode.
Humidity set point
The set point can be adjusted from 30% to 90% Rh in steps of 5%; pressing the UP (Key 2) or DOWN (Key
3) keys increases or decreases the set point value by 5%.
Mode. Key (7)
Pressing this button the following operating modes can be set:
• DEHUMIDIFICATION, indicated by the "drop" symbol led ON. During first 5 seconds the display will show
the detected humidity, flashing numbers.
• DRYING, indicated by the “HI” symbol light on the display and corresponding “HI” led ON, this indicates
that the dehumidifier is running continuously at maximum power.
